机器人模型完成后，需要进行验收确保制作出来的模型符合展示公司的营销策略与外观要求，如机器人模型完成存在误差与突发状况便于及时进行更改。那么机器人模型的验收标准怎么样呢？ 大型机器人模型制作厂家为您解说。

After the robot model is completed, it needs to be checked and accepted to ensure that the produced model meets the marketing strategy and appearance requirements of the exhibition company. If the robot model is completed with errors and emergencies, it is convenient to change it in time. What about the acceptance criteria of the robot model? The manufacturer of large-scale robot model will explain it to you.

一、仿真度与精细度

1、 Simulation and fineness

1.机器人模型都是按照设备进行缩小或放大，所以在制作后需要对其模型的外观尺寸进行确认，是否符合设计图纸的制作要求。

1. The robot model is reduced or enlarged according to the equipment, so the appearance size of the model needs to be confirmed after production to see if it meets the production requirements of the design drawings.

2.这里需要展示公司负责人进行现场核对，从而避免图纸与设计图纸中存在的尺寸差异，也是双方公司进行现场确认机器人模型的道流程。

2. It is necessary to show that the person in charge of the company conducts on-site verification, so as to avoid the size difference between the drawings and the design drawings, which is also the process for both companies to confirm the robot model on site.

二、结构

2、 Structure

1.机器人模型展示的主题也是存在不一致的，有的公司模型展示工业产品的外观，有的展示工业产品的内部结构，还有的展示其产品的工作原理。

1. The theme of robot model display is also inconsistent. Some company models show the appearance of industrial products, some show the internal structure of industrial products, and some show the working principle of their products.

2.在进行验收时，注意机器人模型的展示主题，进行确认其内部构造与外观问题。

2. During the acceptance, pay attention to the display theme of the robot model, and confirm its internal structure and appearance problems.

三、灯光效果

3、 Light effects

1.灯光效果在机器人模型中不是哪里都能使用的到，有些需要动态演示的机器人模型需要设置灯光，以达到工业产品运行中的效果。

1. The light effect can not be used anywhere in the robot model. Some robot models that need dynamic demonstration need to be set with lights to achieve the effect in the operation of industrial products.

2.在这里需要对自身产品在运作中散发的光源进行确认，是否符合真实工业产品运行时的灯光场景。

2. Here, it is necessary to confirm whether the light source emitted by the product in operation conforms to the light scene of the real industrial product in operation.

四、污渍处理

4、 Stain treatment

1.在制作机器人模型后，模型会留下一些比较难处理的污渍，污渍处理不好将影响到机器人模型的展示效果，在验收时，注意机器人模型周边是否存在污渍，如有则要求模型公司进行处理。

1. After the robot model is made, the model will leave some stains that are difficult to deal with. Poor stain treatment will affect the display effect of the robot model. During acceptance, pay attention to whether there are stains around the robot model, and ask the model company to deal with them if there are any.

为了避免在机器人模型完成后，展示公司需要进行细节修改，所以在初步制作完成后，需要邀请展示公司负责人进行验收，保证机器人模型和设计图纸无误，需要将提供验收流程供验收人员进行验收。关注我们 //www.leshep.com，了解更为详细的事情！

In order to avoid the need for the exhibition company to modify the details after the completion of the robot model, it is necessary to invite the person in charge of the exhibition company for acceptance after the preliminary production is completed, to ensure that the robot model and design drawings are correct, and to provide the acceptance process for the acceptance personnel. Follow us //www.leshep.com For more details!