At present, the situation of aircraft model market and product quality are uneven. Some small enterprises lack the awareness of independent innovation, often without the authorization of airlines, aircraft manufacturers and other units, without formal business models such as fake and shoddy products and products with uneven quality, resulting in a large number of low-cost and low-quality products flooding the market, seriously affecting the reputation of other formal brands and perfect innovation measures. The main differences of these products are as follows:

一、模型飞机的正规比例

1. The normal proportion of model aircraft.

因为非正规厂家生产的模型产品未经航空公司、飞机制作厂授权，而是通过仿造正规厂家产品，或许通过互联网上搜集的一些飞机图片生产而成，因而模型的仿真程度相对较差、比例失调。正规厂家则是依据航空公司、飞机制作厂所供给图纸生产模型。这些厂家受生产工艺的限制无法生产出来仿真程度更高的模型，而这些低仿真程度的模型简直都有以下共同的特征。

Because the model products produced by informal manufacturers are not authorized by airlines and aircraft manufacturers, but are produced by imitating the products of formal manufacturers, perhaps through some aircraft pictures collected on the Internet, the simulation degree of the model is relatively poor and the proportion is out of balance. Regular manufacturers produce models according to the drawings provided by airlines and aircraft manufacturers. Limited by the production process, these manufacturers cannot produce models with higher simulation degree, and these models with low simulation degree almost have the following common characteristics.

二、那些制造工艺较差的突出点

2、 Those outstanding points with poor manufacturing technology

1、模型飞机外表容易变黄、退色

1. The appearance of model aircraft is easy to turn yellow and fade

定制飞机模型生产厂家为确保产品的品质，在模型生产中所选用的都是价钱较贵的涂料，因而这种模型即便长时间存放也不容易涌现变黄、退色等景象；而小企业以及非正规企业为了降低生产本钱则选用价钱低廉的涂料，这种涂料生产出来的模型刚开始与大厂家生产出来基础无异，然而短则半年长则一年就会逐步涌现变黄、退色的状况，这也是为什么一些厂家能把价钱压的更低的原因之一。而关于模型零售销售商来说，假如库存货物不能尽快销售进来就会存在较高的危险，并且这种产品即便销售进来恐怕也很难会有回头客。

In order to ensure the quality of products, the manufacturer of customized aircraft model selects expensive high-grade coatings in model production, so even if the model is stored for a long time, it is not easy to turn yellow and fade; In order to reduce the production cost, small enterprises and informal enterprises choose low-cost coatings. The model produced by this kind of coatings is the same as that produced by large manufacturers at the beginning. However, it will gradually turn yellow and fade in the short of half a year or a year. This is one of the reasons why some manufacturers can lower the price. As for model retailers, if the inventory goods cannot be sold as soon as possible, there will be a high risk, and even if this product is sold, it is difficult to have repeat customers.

2、机翼、发起机等部件容易断裂、脱离

2. Wing, engine and other components are easy to break and separate

因为一些小的模型生产企业以及非正范围型生产企业遭到生产工艺的限制，以及为勤俭本钱而选用较差的材料的原因，他们所生产出来模型的机翼、发起机等部件在运输途中十分容易断裂、脱离。这种损失率在成批的货物运输中可能相对较小，然而关于少量货物的快递运输中这种损失率有时甚于高达70%以上。在互联网上网站曾经涌现过为数众多的此类模型零售销售商，并低价销售这些厂家的产品，然而因为高的运输损失率以及前文所说的高的产品瑕疵率，大部分商家在销售一段时间后就纷繁关门或许改行。

Because some small model production enterprises and non positive range production enterprises are limited by production technology and choose poor materials for diligence and frugality, the wing, starter and other parts of the model they produce are very easy to break and separate during transportation. This loss rate may be relatively small in the transportation of bulk goods. However, in the express transportation of a small amount of goods, this loss rate is sometimes as high as more than 70%. On the Internet, there have been a large number of such model retail sellers on the website, and sell the products of these manufacturers at low prices. However, due to the high transportation loss rate and the high product defect rate mentioned above, most merchants close down or change their business after selling for a period of time.

3、模型飞机外表不光滑、杂质较多

3. The appearance of the model aircraft is not smooth and there are many impurities

树脂类飞机模型因为很多工序是须要通过手工完成，而一些厂家一味的寻求产量来到达降低本钱和产品价钱的目标，因而这些模型往往缺少必要的质检工序，成品模型中或多或少都会有一些存在瑕疵的产品混在当中，这不只严峻影响产品的品质，关于模型经销商来说尽管进货价钱可能对比低，然而这样高的瑕疵率不只不能把销售价钱降低，也使得模型销售商处于一种恶性循环当中。

Because many processes of resin aircraft models need to be completed manually, and some manufacturers blindly seek output to achieve the goal of reducing cost and product price, these models often lack necessary quality inspection processes, and some defective products will be mixed in the finished model more or less, which not only seriously affects the quality of products, For model dealers, although the purchase price may be relatively low, such a high defect rate can not only reduce the sales price, but also make the model dealers in a vicious circle.

以上内容就是今天小编为您介绍的 大型坦克模型//www.leshep.com的相关知识，更多的内容请继续关注我们。

The above content is the large tank model introduced to you by Xiaobian today //www.leshep.com For more information, please continue to pay attention to us.