1、先研究控制原理，制电路图。
1. First, study the control principle and prepare the circuit diagram.
2、找电子厂求他们设计并制造电路板。
2. Ask the electronics factory to design and manufacture circuit boards.
3、编程员负责电路板的测试。
3. The programmer is responsible for testing the circuit board.
4、根据尺寸，然后用软件开始做合适的3d模型，然后将其转换成图纸给模具组制造相关零件，此时电力控制部分与机械部分均已完成，经组装后开始调试，此时编程员仍然是主导者，负责调试，若其功能玩好，就开始进行精加工和部分的改进。
4. According to the size, then use the software to make a suitable 3D model, and then convert it into a drawing for the mold group to manufacture relevant parts. At this time, the electric control part and the mechanical part have been completed, and the debugging is started after assembly. At this time, the programmer is still the leader, responsible for debugging, and if its function plays well, start to finish machining and part of the improvement.
5、终呈献给大家的机器人看似结构严谨。
5. The robot finally presented to you seems to be structurally rigorous.
6. In fact, the cooperation of the large-scale robot model production team needs the support of some manufacturing enterprises.
7、高达模型是用射出成型机，射出板件，然后由买家自己组装。
7. The Kodak model uses the injection molding machine to shoot the plates, and then the buyer assembles them.
8、成品玩具是用模具生产出多个零件，然后由工人组装。
8. Finished toys are produced by molds and then assembled by workers.
9、先前都需要由设计师设计绘图。
9. Previously, designers were required to design drawings.
此外在对机器人模型进行清洁的时候要切忌小心谨慎，一定要用干净而又柔软的布片来擦去尘埃，对于云开全站app登录入口官网 有些沟处不易用布的地方好用毛刷或是吸尘器来吹走灰尘。我们在保养机器人模型时，就要学会防御一些外界的有害化学物质，如：酸类、氯化物等等!还要就是在移动云开全站app登录入口官网 时搬运工一定要手戴放可移动，不让大家直接用手碰触云开全站app登录入口官网 的原因就是以免手上的汗腐蚀到它。
In addition, when cleaning the robot model, you should be careful. You must use clean and soft cloth to wipe away the dust. For some places where the cloth is not easy to use in the groove of the transformer model, you can use a brush or vacuum cleaner to blow away the dust. When we maintain the robot model, we should learn to defend against some harmful chemicals from the outside, such as acids, chlorides, and so on! Also, when moving the transformer model, the porter must wear it and put it on his hand. The reason why we can't touch the transformer model directly is to prevent the sweat on his hand from corroding it.
对于长时间经过摆放且出现暗哑现象的云开全站app登录入口官网 ，对他们进行擦试时不可大力用布擦，要用棉比质的细布轻轻擦试主要达到抛光的效果，也可让模型表面的保护蜡层得到重新的绽放。如果加上一些特用的抛光物那就更再好不过了，但物料都需要进行选购才可以让其返还其特有的色着。更多相关内容就来我们网站
//www.leshep.com咨询吧！
For transformers models that have been placed for a long time and appear dark and dumb, they should not be wiped with cloth vigorously, but should be lightly wiped with a fine cotton cloth to achieve the polishing effect, and the protective wax layer on the surface of the model can also be reborn. It would be even better if some special polishing materials were added, but the materials need to be purchased before they can be returned to their unique color. Come to our website for more relevant content //www.leshep.com Ask!
