由于飞机机械模型材料的细节，维修飞机机械模型配件和检查是必不可少的，针对造成的损坏，修复损坏的部件，检查气动喷射器的所有部件是否泄漏和具体措施用例。
Due to the details of aircraft mechanical model materials, it is essential to repair aircraft mechanical model accessories and check. For the damage caused, repair the damaged parts, and check whether all parts of the pneumatic ejector leak and specific measures.
水贴纸的力学模型是脆弱的很容易干燥，因此模型在很长时间的地方将不得不解除水贴纸包装食品保鲜膜长时间存储。把它在冰箱等用于可以取出来。如果破解了水贴纸，你可以使用模型油漆稀释喷淋水贴纸，反复喷洒不止一次可以被修复。
The mechanical model of water stickers is fragile and easy to dry, so the model will have to be removed from the water stickers for a long time, and the food preservation film will be stored for a long time. Put it in the refrigerator, etc. it can be taken out. If you crack the water sticker, you can use the model paint to dilute and spray the water sticker, which can be repaired by spraying repeatedly more than once.
对于受损气管的更换，飞机机械模型关注跟踪检测的几个重要部位：顶部凸出的引入，而对面件的作用是保证模型的开合活动和顶部的塑料部件突出。
For the replacement of the damaged air pipe, the aircraft mechanical model focuses on several important parts of the tracking and detection: the introduction of the top bulge, and the function of the opposite part is to ensure the opening and closing activities of the model and the protrusion of the plastic parts on the top.
零件损坏和粘连会导致停机，因此应经常保留模型顶针和润滑导柱，并定期检查顶针和导柱是否变形和表面损坏。一经发现，应及时更换。
Damage and adhesion of parts will lead to shutdown. Therefore, the ejector pin and lubricating guide post of the model should be kept frequently, and the ejector pin and guide post should be checked regularly for deformation and surface damage. Once found, it should be replaced in time.
生产周期完成后，
大型飞机模型厂家提醒您特别注意工作面的抗拉强度的保护，运动，以及零件的涂层覆盖，特别是上齿轮，轴承零件和弹簧飞机机械模型，确保其始终处于佳工作状态。
After the production cycle is completed, the large aircraft model manufacturer reminds you to pay special attention to the protection and movement of the tensile strength of the working surface, as well as the coating coverage of parts, especially the upper gear, bearing parts and spring aircraft mechanical model, to ensure that it is always in good working condition.
随着生产时间的推移，冷却路容易沉积水垢和铁锈、泥浆和一种藻类，使冷却流道的横截面变量变小冷却通道变窄，大大降低了冷却液和模型直间的热交换率，增加了企业的生产成本。因此，应注意流道的清洁，对于热回路的飞机机械模型，加热和控制系统的维护以防止故障的发生尤为重要。
With the passage of production time, the cooling path is easy to deposit scale and rust, mud and a kind of algae, which reduces the cross-sectional variable of the cooling channel and narrows the cooling channel, greatly reduces the heat exchange rate between the coolant and the model, and increases the production cost of the enterprise. Therefore, attention should be paid to the cleaning of the flow channel. For the aircraft mechanical model of the thermal circuit, the maintenance of the heating and control system is particularly important to prevent failures.
This is the necessary testing content of these important parts during aircraft model maintenance. If you have other ideas or needs, please follow our website //www.leshep.com Contact us to provide you with a platform.
